ČESKY · POLSKI · PORTUGUÊS · 简体中文 · 繁體中文 · ภาษาไทย · 日本語 NEDERLANDS · ESPERANTO · العربي · TÜRKÇE · 한국어 · हिन्दी · فارسی · ROMÂNĂ · SLOVENSKY
The LAMBDA VIT-FIT syringe pump and the other LAMBDA pumps are the only pumps on the market, which allow a simple and precise integration of the amount of liquid that has been delivered by the pump.
The electrical impulses, which move the pump motor, are registered and the RS-interface allows the control from a PC.
In chemical or biological processes, where the pump is controlled e.g. by a pH-stat it is often important to know, when and how much acid or base was added. This data yields important information about the process, its kinetics and time of completion, etc.
Another use of the INTEGRATOR is for the measurement of enzyme activities (e.g. amidases, esterases, lactamases, lipases, proteases and other enzymes).
The PUMP-FLOW INTEGRATOR can now be electronically implemented inside the VIT-FIT and VIT-FIT HP syringe pumps and, therefore, does not require any additional valuable laboratory bench space.
The INTEGRATOR connected to LAMBDA pumps allows new and unusual applications (e.g. gradient making, counter flow elution, liquid chromatography, electronic burette, etc.).
PNet is a PC control software for the remote control of LAMBDA laboratory instruments (syringe pump VIT-FIT, peristaltic pumps PRECIFLOW, MULTIFLOW, HIFLOW, MAXIFLOW, powder dosing instrument DOSER and gas flow controller MASSFLOW).
The pumps are connected to the computer through a RS-232 or RS-485 interface.
Up to 6 LAMBDA laboratory instruments and 12 INTEGRATORs can be connected and controlled simultaneously.
If other functions are needed, you can make contact with us (firstname.lastname@example.org).
If possible, we will integrate the desired functions in your software system, in such a way that it conforms optimally to your specifications.
|4803||PUMP-FLOW INTEGRATOR (for LAMBDA pumps, DOSER and MASSFLOW)|
|4810||Pump remote control (analog and digital) cable, 8 poles (open ends)|
|4802||Pump ON/OFF remote control cable, 2 poles (open ends)|
|4823||Foot switch for ON/OFF control, 8 poles|
|4824||Cable for inverted analog ON/OFF control, 8 poles|
|4830||Valve connection cable 6 poles (open ends) for VIT-FIT Syringe Pump|
|Interface and Control software|
|4822||RS232 interface (for connection of the instruments to the serial port)|
|4816||RS485 interface (for connection of the instruments to the serial port)|
|4818||Power supply for RS232/485 converter (5 V / 1 W)|
|4819||RS-line connection cable (serial)|
|6600||PNet control software for peristaltic and syringe pumps, DOSER or MASSFLOW|
|800202||Quadruple plug box (Power and RS-connection for up to 4 LAMBDA laboratory instruments)|
|4821||Plug-in power supply (12V/24W) for HIFLOW, MAXIFLOW, VIT-FIT, MASSFLOW|
|4813-b||BLDC motor (HIFLOW, VIT-FIT)|
|7010||Syringe fixing strap|
1. SETTING UP THE SYRINGE PUMP · 2. PROGRAMMING OF THE SYRINGE PUMP · 3. REMOTE CONTROL · 4. OVER PRESSURE PROTECTION · 5. RECOMMENDATIONS · 6. SAFETY · 7. TECHNICAL SPECIFICATIONS · 8. ACCESSORIES AND SPARE PARTS · 9. GUARANTEE · 10. APPENDIX>> Up