7.1. Pump-Flow Integrator (Art. no. 4803)

The DOSER powder pump and the other LAMBDA pumps are the only pumps on the market, which allow a simple and precise integration of the amount of liquid, solid or gas that has been delivered by the pump.

The electrical impulses, which move the pump motor, are registered and transformed into a direct voltage. This voltage can be measured or recorded by common recorders or voltmeters. The RS 485 interface allows the control.

In processes where the pump is controlled e.g. by a pH-stat during a fermentation or cell culture to keep the pH of the medium constant, it is often important to know when and how much acid or base were added. This data yields important information about the process, its kinetics and time of completion, etc.

Another use of the INTEGRATOR is for the measurement of enzyme activities (e.g. amidases, esterases, lactamases, lipases, proteases and other enzymes).

The pump-flow INTEGRATOR can now be electronically implemented inside the DOSER powder dosing instrument and, therefore, does not require any additional valuable laboratory bench space.

The activated INTEGRATOR within the LAMBDA pumps allows new and unusual pump applications (e.g. gradient making, counter flow elution, liquid chromatography, electronic burette, etc.).

 

7.2. PNet control software for peristaltic and syringe pumps, DOSER or MASSFLOW (Art. No. 6600)

PNet is a PC control software for the remote control of LAMBDA laboratory instruments (peristaltic pumps PRECIFLOW, MULTIFLOW, HIFLOW, MAXIFLOWsyringe pump VIT-FITpowder dosing instrument DOSER and gas flow controller MASSFLOW).

The pumps are connected to the computer through a RS-232 or RS-485 interface. Up to 6 LAMBDA laboratory instruments and 12 INTEGRATORs can be connected and controlled simultaneously.

 

7.3. List of accessories and spare parts

Art. No.Accessories
4803PUMP-FLOW INTEGRATOR (for LAMBDA pumps, DOSER and MASSFLOW)
4810Pump remote control (analog and digital) cable, 8 poles (open ends)
4802Pump ON/OFF remote control cable, 2 poles (open ends)
4823Foot switch for ON/OFF control, 8 poles
4824Cable for inverted analog ON/OFF control, 8 poles
Interface and Control software
4822RS232 interface (for connection of the instruments to the serial port)
4816RS485 interface (for connection of the instruments to the serial port)
4817RS232/485 converter
4818Power supply for RS232/485 converter (5 V / 1 W)
4819RS-line connection cable (serial)
6600PNet control software for peristaltic and syringe pumps, DOSER or MASSFLOW
800202Quadruple plug box (Power and RS-connection for up to 4 LAMBDA laboratory instruments)
Spare parts
4820Plug-in power supply (12V/6W) for PRECIFLOW, MULTIFLOW, DOSER
5801Glass adaptor with ground NS 29/32 fitting
5802Screw cap SVL 42
5803Teflon disc
5804Distributor (normal)
5805Distributor for very fluid powders
5806Rubber/Teflon sealing disc
5807Centering part
5808-bBlind plug
5808-gGassing plug
5809Control unit
5810Glass vessel with side arm (approx. 0.2 l)
5810-sSilicone coated glass vessel with side arm (approx. 0.2 l)
5811Glass vessel with side arm (approx. 1 l)
5811-sSilicone coated glass vessel with side arm (approx. 1 l)