기체 유량 제어장치

기체 유량 제어장치

LAMBDA MINIFOR 발효조-발효기 함께 사용할 수 있도록 특수하게 설계된 새로운 유량 제어장치. MASSFLOW 를 사용하면 다른 가스 장치를 사용하지 않고도 세포 배양 시 pH 를 정확하게 자동으로 제어할 수 있습니다.

  • CO2 기체를 일정하게 추가하여 세포 배양 시 pH 를 제어
  • 적절한 제어장치로 공기, O2, N2, CO2 및 기타 기체 흐름 제어
  • 압력 하강을 최소화한 고품질 층 유량 제어 센서
  • 단독으로 사용 가능하며, 전면 패널에서 모든 기능에 접근 가능
  • 유량 범위 0–500 ml/min 또는 0–5 l/min
  • 마이크로프로세서로 제어되는 독점 비례 니들 밸브로 유량 조절
  • 선형 오차 ± 3 % 이하(기타 제조업체에서 사용하는 실물 백분율 정밀도보다 훨씬 우수함)
  • ± 0.5% 이상의 반복성
  • 유량 프로그래밍 가능
  • INTEGRATOR 로 유량 부피 기록 가능
  • RS-485 인터페이스(옵션)
  • PNet 제어 소프트웨어(옵션)
Type: LAMBDA MASSFLOW – microprocessor-controlled gas flow controller (controller only) and gas flow meter
Accuracy: ± 3% reading or 1 digit
Repeatability: ± 0.5 % reading or 1 digit
Flow range:
MASSFLOW 5000: 0 - 5.00 l/min in 0.01 l/min steps (controller)
MASSFLOW 500: 0 - 500 ml/min in 1 ml/min steps (controller)
MASSFLOW 5000-s: 0 - 5.00 l/min in 0.01 l/min steps (meter only)
MASSFLOW 500-s: 0 - 500 ml/min in 1 ml/min steps (meter only)
MASSFLOW 500-hs: Auto-range: 0 - 99.9 ml/min in 0.1 ml/min steps and 100 - 500 ml/min in 1 ml/min steps (meter only)
Calibration: N2/Air (pre-calibrated sensors for other gases available on request)
Non-volatile memory: storage of all settings
Maximum pressure: 0.2 MPa (2 bar)
Power supply: 90–240 V/50–60 Hz AC plug-in power supply with DC 12V/24W output; possible field operation on 12 V accumulator (Plug types: AU, CH, EU, UK, US)
Interface: RS-485 or RS-232 (optional)
Remote control: 0-10 V; (option 0-20 or 4-20 mA); ON/OFF (controller only)
Dimensions: 10.5 (W) × 8 (H) × 17 (D) cm
Weight: 800 g
Safety: CE, meets IEC 1010/1 norm for laboratory instrument
Operation temperature: 0 – 40 ⁰C
Operation humidity: 0-90% RH, not condensing