Măsurarea și reglarea precisă a fluxului de gaze

Măsurarea și reglarea precisă a fluxului de gaze

Special conceput pentru folositrea cu bioreactorul sau fermentatorul LAMBDA.

Proiectat special pentru utilizarea cu bioreactoare LAMBDA sau fermentatoare. De exemplu, permite reglarea pH-ului culturii celulare prin adăugarea de CO2 controlat, care reglează oxizii dizolvați prin reglarea debitului. De asemenea, poate fi folosit separat, deoarece toate funcțiile pot fi controlate de la panoul de control.

 

Debit MASSFLOW 5000: 0 – 5 l/min , diviz. 10 ml/min
MASSFLOW 500: 0 – 500 ml/min diviz. 1 ml/min
Calibrare Nitrogen/aer
Precizie ±3 %
Repetabilitate ±0.5 %
Temperatura de operare 0 to 50 °C
Presiunea maxima 0.2 MPa
Dimensiuni 105 × 80 × 170 mm (WxHxD)
Greutate 800 g
Alimentare 90-240 V / 50-60Hz, output 12 V DC
Telecomanda 0-10 VDC (intreaga scala); ON/OFF;
RS-485 or RS-232 (optional)
Garantie 2 ani
Type: LAMBDA MASSFLOW – microprocessor-controlled gas flow controller (controller only) and gas flow meter
Accuracy: ± 3% reading or 1 digit
Repeatability: ± 0.5 % reading or 1 digit
Flow range:
MASSFLOW 5000: 0 - 5.00 l/min in 0.01 l/min steps (controller)
MASSFLOW 500: 0 - 500 ml/min in 1 ml/min steps (controller)
MASSFLOW 5000-s: 0 - 5.00 l/min in 0.01 l/min steps (meter only)
MASSFLOW 500-s: 0 - 500 ml/min in 1 ml/min steps (meter only)
MASSFLOW 500-hs: Auto-range: 0 - 99.9 ml/min in 0.1 ml/min steps and 100 - 500 ml/min in 1 ml/min steps (meter only)
Calibration: N2/Air (pre-calibrated sensors for other gases available on request)
Non-volatile memory: storage of all settings
Maximum pressure: 0.2 MPa (2 bar)
Power supply: 90–240 V/50–60 Hz AC plug-in power supply with DC 12V/24W output; possible field operation on 12 V accumulator (Plug types: AU, CH, EU, UK, US)
Interface: RS-485 or RS-232 (optional)
Remote control: 0-10 V; (option 0-20 or 4-20 mA); ON/OFF (controller only)
Dimensions: 10.5 (W) × 8 (H) × 17 (D) cm
Weight: 800 g
Safety: CE, meets IEC 1010/1 norm for laboratory instrument
Operation temperature: 0 – 40 ⁰C
Operation humidity: 0-90% RH, not condensing