11.1 Pump flow integrator (Art. No. 4803)

The PRECIFLOW peristaltic pumps and the other LAMBDA instruments like powder dosing instrument LAMBDA DOSER are the only pumps on the market, which allow a simple and precise integration of the amount of liquid, solid or gas that has been delivered by the pump.

The electrical impulses, which move the pump motor, are registered and transformed into a direct voltage. This voltage can be measured or recorded by common recorders or voltmeters. The RS 485 interface allows the control from a PC.

In processes where the pump is controlled e.g. by a pH-stat during a fermentation or cell culture to keep the pH of the medium constant, it is often important to know when and how much acid or base were added. This data yields important information about the process, its kinetics and time of completion, etc.

Another use of the INTEGRATOR is for the measurement of enzyme activities (e.g. amidases, esterases, lactamases, lipases, proteases and other enzymes).

The pump-flow INTEGRATOR can now be electronically implemented inside the PRECIFLOW peristaltic and tubing pump and therefore, does not require any additional valuable laboratory bench space.

The activated INTEGRATOR within the LAMBDA pumps allows new and unusual pump applications(e.g. gradient making, counter flow elution, liquid chromatography, electronic burette, etc.)

 

11.2 PNet control software for peristaltic and syringe pumps, DOSER or MASSFLOW (Art. No. 6600)

PNet is a PC control software for the remote control of LAMBDA laboratory instruments (peristaltic pumps PRECIFLOW, MULTIFLOW, HIFLOW, MAXIFLOW & MEGAFLOWsyringe pump VIT-FITpowder dosing instrument DOSER and gas flow controller MASSFLOW).

The pumps are connected to the computer through a RS-232 or RS-485 interface. Up to 6 LAMBDA laboratory instruments and 12 INTEGRATORs can be connected and controlled simultaneously.

Remote control of the peristaltic pump with the PNet control software 

 

11.3 List of accessories and spare parts

Art. No.Accessories
4803PUMP-FLOW INTEGRATOR (for LAMBDA pumps, DOSER and MASSFLOW)
4810-oPump remote control (analog and digital) cable, 8 poles (open ends)
4802Pump ON/OFF remote control cable, 2 poles (open ends)
4823Foot switch for ON/OFF switching
4823-bFoot switch for ON/OFF switching (Bistable switch)
4824Cable for inverted analog ON/OFF control, 8 poles
 Interface and Control software
4822RS232 interface (for connection of the instruments to the serial port)
4816RS485 interface (for connection of the instruments to the serial port)
4817RS232/485 converter
4817-kitRS485 connection kit (for connection to a serial port or USB port)
4818Power supply for RS232/485 converter (5 V / 1 W)
4819-PRS-485 connection cable
4819-232RS-232 connection cable
4819-PERS-485 line cable with extension plug for connection of an additional instrument
6600PNet control software for peristaltic and syringe pumps, DOSER or MASSFLOW
800202Quadruple plug box (Power and RS-connection for up to 4 LAMBDA laboratory instruments)
 Spare parts
4820Plug-in power supply (12V/12W) for PRECIFLOW, MULTIFLOW, DOSER
4821Plug-in power supply (12V/50W) for HIFLOW, MAXIFLOW, VIT-FIT, MASSFLOW, HI-DOSER
6003Plug-in power supply (12V/65W) for MEGAFLOW
4805Roller
4806Stainless steel spring
4807Excentric lever
4808Rotor
4809Cover
4811Pump head
4813-sStepping motor (PRECIFLOW, MULTIFLOW)
4813-bBLDC motor (HIFLOW, VIT-FIT)
4813-bmBLDC motor (MAXIFLOW)
4814-sGearbox (PRECIFLOW, MULTIFLOW)
4814-bGearbox (HIFLOW, VIT-FIT)
4814-bmGearbox (MAXIFLOW)
4815-1Silicone tubing 0.5/2.5 mm X 10 m
4815-2Silicone tubing 1/3 mm X 10 m
4815-3Silicone tubing 2/4 mm X 10 m
4815-4Silicone tubing 3/5 mm X 10 m
4815-5Silicone tubing 4/6 mm X 10 m
4815-3vViton tubing 2/4 mm X 5 m
4815-4vViton tubing 3/5 mm X 5 m
800113Stainless steel tubing clamp